|
How
to OPEN THE CARTRIDGE of a DVD-RAM DISC
|
|
| Follow
the procedure and precautions outlined below to remove the
disc from the cartridge. See diagram A for type 2
cartridge (4.7 GB DVD-RAM) and diagram B for type 4
cartridge (9.4 GB DVD-RAM). |
|
| 1.
To remove the disc: |
- Push and remove
the cartridge locking pin with a sharp-tipped object,
such as a ballpoint pen.
- Open the cover
by pushing the sharp-tipped object into the gap on the
left, front side of the cartridge.
|
|
|
2.
|
Do
not touch the recording surface. Fingerprints,
dirt, dust and scratches on the recording surface
can destroy previously recorded data and prevent
recording of additional data. |
| 3. |
Open
the cover with care. If you damage the cover,
you may not be able to close it again. |
| 4. |
Make
sure the printed side of the shutter and the printed
side of the disc are both facing the same side when
returning the disc to its cartridge. Also,
note the setting of the write-protect tab. |
| |
| 5. |
Always
return a discs to its cartridge for storage. |
|
|
